New generation “Heavy Duty” grease with MicPol® technology with very high stability.
Applications
- All ball, rolling, roller and plain bearings (hinge applications)
- Open gears and racks
- Dental arch couplings
- Heavy duty guides
- Cables
- Spindles
Advantages
- Excellent bearing sealing through seal formation
- Easy to pump: is very flexible, dirt, sand, dust and water remain out of the bearing
- Remains lubricating after mixing with sand and sludge
- Very high stability: remains flexible and hardens
- HD thickener is in itself already an excellent lubricant and protects very well against corrosion
- Service life that is 5 to 20 times longer than a good EP 2 grease
- For very high loads: pressure resistance > 7,500 N (four-ball test)
- Surfaces of gears, gears and cables remain inspectable
- Grease does not run out of the lubrication point
- Suitable for automatic lubrication systems
- Excellent anticorrosive and lubricating properties (remains completely intact when in contact with water and/or dirt)
- Temperature range from -25°C to + 160°C
- Excellent adhesion to steel (smoothly polished pins and bushes)
- HD2 NLGI 2
- Can neutralize water up to 50% of its own volume
- Oil viscosity: @ 40°C 200 cSt
- Calcium sulfonate
- Pressure load > 750kg/mm2
- Dn-factor 500.000