QUINTOLUBRIC® 865 Series (HFDu Fire Resistant Hydraulic Fluid)
Description
QUINTOLUBRIC® 865 series products do not contain water, mineral oil, or phosphate ester, and are based on high-quality, synthetic, organic esters and carefully selected additives to achieve excellent hydraulic fluid performance.
This product offers the lubrication level of premium, anti-wear hydraulic oils, and can be used with hydraulic components from all major manufacturers.
Key Benefits
- Improved security against fire
- Factory Mutual Approved
- Compatible with standard seal materials
- Product is >90% biodegradable according to CEC L-33-T-82
- Excellent lubrication properties and shear stability
Properties
| Property | Typical Value | Unit |
| Appearance/Colour | Yellow to amber fluid | [ – ] |
| Viscosity Index (ASTM D2270) | ±200 | |
| Density at 15ºC (ASTM D1298) | 0.92 | g/cm³ |
| Acid Number (ASTM D974) | 0.7 | mg KOH/g |
| Kinematic Viscosity (ASTM D445) at 20ºC at 40ºC at 100ºC | VG46 VG68 109 109 47.5 47.5 9.5 9.5 | mm²/s or cSt |
| Pour Point (ASTM D97) | <-25 (<-13) | °C (°F) |
| Foam Test at 25°C (ASTM D892) Sequence 1 | 15-0 | ml-ml |
| Corrosion Protection ISO 4404-2 ASTM D665A/D130 | Pass Pass/1a | |
| Flash Point (ASTM D92) | 307 (585) | °C (°F) |
| Fire Point (ASTM D92) | 357 (675) | °C (°F) |
| Air Release (ASTM D3427) | 7 | min. |
| Vane Pump Test (ASTM D2882) | <10 | mg wear |
| Gear Lubrication (DIN 51354-2) | >12 | FZG load stage |
| Demulsibility (ASTM D1401) | 41-39-0 (25) | ml-ml-ml (min.) |
| Auto Ignition Temperature (DIN 51794) | >427 (>800) | °C (°F) |
Health, Safety and Handling
Please consult the Safety Data Sheet (SDS) for information on storage, safe handling and disposal. The conditions or methods of handling, storage, use and disposal of the product are beyond our reasonable control – we assume no liability for any ineffectiveness of the product or any injury or damage, arising out of or in connection with these conditions.
Applications
QUINTOLUBRIC® 865 was designed to replace anti-wear, mineral oil based hydraulic fluids as well as vegetable-based fluids and polyol esters.
QUINTOLUBRIC® 865 can be used in or near fire hazards and in environmentally sensitive hydraulic applications without compromising the overall hydraulic system operation.
Engineering Data
| Property (Test Method) | Typical Value | Unit |
| Specific Heat at 20ºC (D 2766) | 2.06 0.49 | kJ/kg ºC Btu/lb ºF |
| Thermal Conductivity at 19ºC (D2717) | 0.167 | J/sec m/ºC |
| Dielectric Breakdown Voltage (D877) | 30 | kV |
| Bulk Modulus at 20ºC At 3,000 psi | 266,900 | psi |
Fluid Maintenance
In order to lengthen fluid life, the product should be kept free from water and dirt. High temperatures should also be avoided. We recommend a program of regular fluid analysis (no less than twice per year).
Compatibility
Seals, Hoses and Packings
Most standard materials like NBR or buna (medium to high nitrile rubber) are compatible, but because of the number of material types available and variations in their application, specific recommendations should be solicited from the materials manufacturer, or the Quaker Houghton
laboratory. Excellent results are obtained with FPM (Viton®) and it is therefore recommended for higher system temperatures.
Metal
QUINTOLUBRIC® 865 is compatible with iron and steel alloys and most non-ferrous metals and their alloys. It is not compatible with lead, cadmium and has limited compatibility with alloys containing high levels of these metals. QUINTOLUBRIC® 865 has limited compatibility with hot dipped or electro galvanised surfaces and good compatibility with zinc containing alloys. Suitable substitutes for these materials are available and should be used.
Paints and Coatings
QUINTOLUBRIC® 865 is compatible with multicomponent epoxy coatings. It shows limited compatibility with one component (zinc-dust containing) coatings. Specific coating and application recommendations can be obtained from coating manufacturers or directly from Quaker Houghton.
Fluids
QUINTOLUBRIC® 865 is compatible and miscible with nearly all mineral oil, phosphate esters and
polyolester-type hydraulic fluids. It is not miscible or compatible with water-containing fluids. For conversion recommendations, please contact Quaker Houghton.
Elastomers
| ISO 1629 | Description | S* | MD* | D* |
| NBR | Medium to high nitrile rubber (Buna N,>25% acrylonitrile) | C | C | C |
| FPM | Fluoroelastomer (Viton®) | C | C | C |
| PU | Polyurethane | C | C | C |
| CR | Neoprene | S | S | S |
| IIR | Butyl rubber | S | N | N |
| EPDM | Ethylene propylene rubber | N | N | N |
| PTFE | Teflon® | C | C | C |
**(S- Static, MD- Mild Dynamic, D- Dynamic)
C = Compatible
S = Satisfactory for short term use, but replacement with a completely
compatible elastomer is recommended at the earliest convenience.
N = Not Compatible