Description

Anvol PE 46 XC is a high performance fire resistant hydraulic fluid which is primarily intended for use in steam turbine governor and boiler control systems.

Application

  • Anvol PE 46 XC meets the requirements of: BS EN ISO 12922:2002 Class HFDR
  • BS EN 61221:2004 (IEC 61221:2004) Category ISO-L-TCD
  • Factory Mutual Group 1. General Electric GEK 46357. Siemens TLV 9012.
  • Alstom HTGD 690 149E. Alstom SBV PR 1001 B. Alstom (UK) TCS 970.
  • Ansaldo 602W917, TGM 1911.

Technical Data

Name Method Units Anvol PE 46 XC
Density at 15°C ISO 12185 / ASTM D4052 g/ml 1.12
Kinematic Viscosity at 40°C ISO 3104 / ASTM D445 mm²/s 43
Kinematic Viscosity at 100°C ISO 3104 / ASTM D445 mm²/s 5
Pour Point ISO 3016 / ASTM D97 °C -21
Flash Point, COC ISO 2592 / ASTM D92 °C 268
Fire Point, COC ISO 2592 / ASTM D92 °C 368
Autoignition Temperature ASTM E659 °C 575
Foam Sequence I Tendency / Stability ISO 6247 / ASTM D892 mls/mls 30/0
Air Release @ 50°C ISO 9120 / ASTM D3427 mins 1
FZG (A8.3/90) ISO 14635-1 / DIN 51354 FLS 7
Chlorine Content IP 510/04 ppm 2
Volume Resistivity@ 20°C IEC 60247 Mohm/m 160
 

Wick Ignition – Persistence of Burning

 7th Luxemburg Report Section

3.3.2

  

Secs

  

5
Spray Ignition (Spray Flamability

Parameter)

  

Factory Mutual

  

Group 1
 

Hot Manifold at 704°C

  

AMS 3150C

 No flashing or burning

The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.

Get it now

Contact us to get to know more about the product.