VI MicroJet Concept
- Coupling with external PLC possible.
- Solenoid valves.
- Pneumatic micropumps.
- Air supply max. 4 – 5 liters Power 24 V – 220 V/AC 50 Hz.
- Micropump dosage 3 to 30 mm³.
- Pressure transmission 15:1.
- External oil reservoir.
- External light alarm.
Continuous – spray
- Sprays oil for the programmed time.
- Frequencies are pre-programmed.
- User can set the parameters according to requirements: lubrication times (ST) and waiting times (WT).
Puls-spray
- Sprays oil when a certain part passes by, such as a chain link shaft.
- A proximity switch or photocell indicates the synchronization signal on.
- Frequencies are pre-programmed.
- User can set the parameters according to requirements: lubrication times (ST) and waiting times (WT).
Why?
- Correct lubrication without loss of time = fewer working hours. Longer service life of chains, sprockets, and guides. Less noise (always well lubricated).
- Machines do not have to stop for lubrication. Less manual lubrication = more safety (no more between machines).
- Hard-to-reach places are still well lubricated.
- Micro-lubrication offers possibilities to lubricate in the most difficult circumstances (dust, sugar, moisture, aggressive environment, …).
- Lower energy consumption of transport systems through regular lubrication with a minimum of lubricant.
- No breakdowns or claims due to dripping oil.
Advantages
- Very low product consumption.
- Targeted lubrication (micro-dosing).
- No oil dripping: clean working environment.
- Clean machines and floors.
- Applicable for ‘food-approved products’.
- Low time spent (just filling the oil reservoir).
- No oil mist: safe and healthy environment.
- Applicable at high and low temperatures (-45°C to +270°C).
- Lubrication through targeted use of Interflon product.
- Easy adjustment of settings when using logo.
- Can be linked to PLC.
- Significantly longer service life of chains.
- Controlled and optimized lubrication.
Possibilities
- Available in stainless steel.
- Distance from cabinet to application: maximum 15m.
- Use of dual pipe: less prone to failure.
- Outputs can be controlled separately (for different lengths of chains).
- On-site technical support by manufacturer.
- Steel pipes available for very hot environments.
- Oil lines secured with cutting ring and compression nut (no leakage).
- Mechanical and electrical part is separated.
- No flexible oil pipes in cabinet (no internal leakage).
- Oil reservoir: 2.5 L.
- Minimum oil level detection.
- Waterproof rating: IP 54.
- Number of spray outlets: max 12 (6 double nozzles).
- Nozzles: choice between fixed and flexible (returns to home position each time).
- Possibility of blow-off nozzles for dusty environments.
Applications
- Cooling conveyor chains (bakeries, deep-freeze companies, …).
- Conveyor systems in stone, glass, and concrete industry.
- Pallet conveyor systems.
- Push chains in slaughterhouses.
- Power and free chains.
- Chains in general.
- Machining machines.
- Spindle applications.
- Infeed and outfeed conveyors.
- Sorting conveyors.
- Rädler chains.
- Sterilization towers.
- Shrink ovens.
- Wheel conveyors.
- Cable transport.
- Paint lines.
Get in touch
Privacy Policy Terms & Conditions Return & Refund Policy
© 2026 Lubricant Hub. All rights reserved.